Site map
Pages
- CIVA, NDT Simulation Software
- About CIVA
- CIVA, the distributors
- CIVA NDT Application Cases
- Upstream: Inspection before launching manufacturing
- In parallel: Optimize your radiographic inspection
- Upstream: Design and selection of a probe/source
- In parallel: Assessing the deterioration factors
- In parallel: Train and prepare your staff
- Upstream: Validate inspection procedure
- Upstream: Simulation to ensure successful implementation
- Upstream: Optimize your qualification process
- Upstream: Increase the reliability of your POD curves
- Downstream: Improve the reliability of your diagnosis
- Downstream: Optimize and analyse guided wave inspections
- Downstream: Assess complex phenomena in a UT inspection
- In parallel: Optimize the tomographic reconstruction through simulation
- Upstream: Optimize rail and wheelset NDT inspections
- Upstream: Support Structural Health Monitoring developments with simulation
- CIVA tips
- Modules available in CIVA
- Ultrasonic Testing with CIVA
- Guided Wave Testing with CIVA
- Structural Health Monitoring with CIVA
- Eddy Current Testing with CIVA
- Thermographic Testing with CIVA
- Radiographic Testing with CIVA
- Computed Tomography with CIVA
- Ultrasonic Testing Analysis with CIVA
- CIVA-ATHENA2D, SA-FE hybrid approach for Ultrasounds
- Ultrasonic Finite Difference simulation for composites inspection with CIVA FIDEL 2D
- AUT Pipeline testing with CIVA
- Going further with CIVA Script
- AI for NDE with CIVA Data Science
- CIVA Education
- About CIVA
- Contact
- Cookies Policy
- Home page
- Legal Notices
- NDT Simulation
- Industrial sectors
- Documentation
- Publications on CIVA and NDT Simulation
- Experimental validation of CIVA models
- Experimental Validation of CIVA Ultrasonic Models
- Ultrasound – Calibration defects
- Ultrasound – Comparison between different configurations in CIVA
- Ultrasound – Corner echoes
- Corner echoes with Longitudinal (P) mode
- Corner echoes with P mode: Generalities
- Corner echoes with P mode: Synthesis of the validation cases
- Corner echoes with P mode: Echoes analysis for P waves
- Corner echoes with P mode: Influence of the notch height
- Corner echoes with P mode: Influence of the refraction angle
- Corner echoes with P mode: Conclusion and discussion on discrepancies
- Corner echoes with Transverse (SV) mode
- Corner echoes with SV mode: Generalities
- Corner echoes with SV mode: Synthesis of the validation cases
- Corner echoes with SV mode: Influence of the notch height
- Corner echoes with SV mode: Influence of the notch length
- UT – Corner echoes with SV mode: Simultaneous influence of the 2 dimensions of the notch
- UT – Corner echoes with SV mode: Influence of the refraction angle
- UT – Corner echoes with SV mode: Simultaneous influence of the notch height and the refraction angle
- UT – Corner echoes with SV mode: Simultaneous influence of the notch length and the refraction angle
- UT – Corner echoes with SV mode: Conclusion and phenomena explication
- Corner echoes with Longitudinal (P) mode
- Ultrasound – Phased Arrays
- UT – Phased Arrays – Phased Arrays generalities
- UT – Phased Arrays – Experimental and simulation set-up
- UT – Phased Arrays – Results obtained with the several depths focusing algorithm
- UT – Phased Arrays – Results obtained with the sectorial scanning algorithm
- UT – Phased Arrays – Results obtained for the direction and depth focusing algorithm
- UT – Phased Arrays – General conclusion
- Ultrasound – TOFD
- Ultrasound – Calibration
- Ultrasound – Shadowing
- Shadowing – Experimental and simulation setups
- Shadowing – Results with the Ø19mm single element probe
- Shadowing – Results with the Ø12.7mm single element probe
- Shadowing – Results with the Ø6.35mm single element probe
- Shadowing – Comparison experiment / CIVA 2D / ATHENA 2D
- Shadowing – Analysis and interpretation of the results
- Shadowing – Conclusion
- Ultrasound – Geometrical echoes
- Ultrasound – Multiskip echoes
- Multiskip echoes in planar specimen
- UT – Multiskip echoes: Experimental and simulation setup
- UT – Multiple echoes: Results for the 5 MHz single element probe generating T45° waves
- UT – Multiple echoes: Results for the 5 MHz single element probe generating P45° waves
- UT – Multiple echoes: Results for the 5 MHz phased array probe generating T45° waves with different focusing sound paths
- Multiskip echoes in cylindrical specimen
- Multiskip cylindrical: Experimental and simulation setups
- Multiskip cylindrical: Measurement of the attenuation
- Multiskip cylindrical: Notch: results obtained with the flat specimen
- Multiskip cylindrical: Notch: results obtained with the cylindrical specimen
- Multiskip cylindrical: Notch: interpretation of the comparison results
- Multiskip cylindrical: Side Drilled Holes: interpretation of the comparison results
- Multiskip cylindrical: Conclusion
- Multiskip echoes in planar specimen
- Beam characterization of immersion probe on solid inclusions and an infinite plane
- Validation for single element probe
- Inclusion in water – single element – Experimental set-up
- Inclusion in water – single element – Simulation settings
- Inclusion in water – single element – 2.25 MHz probe
- Inclusion in water – single element – 5 MHz probe
- Inclusion in water – single element – 10 MHz probe
- Inclusion in water – single element – Conclusion
- Validation for phased-array probe
- Information on specular, SOV and Complete SOV models
- Validation for single element probe
- Experimental Validation of CIVA Eddy Current Models
- Experimental Validation of CIVA Radiographic Models
- Experimental Validation of CIVA Ultrasonic Models
- Interviews
- News
- Our services
- Page d’exemple
- Privacy policy
- Register Newsletter
- Site map
- The company
Posts by category
- Category: CIVA Software
- CIVA 2025 is now available!
- CIVA 2023 SP4 is being released
- CIVA 2023 SP3 is being released
- CIVA 2023 SP2 is being released
- CIVA Analysis can now read SONATEST data!
- CIVA 2023 is now available!
- Validation of CIVA models
- Compatibility has been enhanced between CIVA & CIVA Analysis 2021 and Olympus systems and probes!
- Blade CT simulation and reconstruction
- CIVA 2021 is now available!
- UT inspection – Limits of acoustic focusing
- Damage monitoring with CIVA SHM
- Your feedback on EXTENDE’s support service
- Your feedback on CIVA software
- CIVA can now process TFM data from TPAC!
- Metamodels – A smart tool for inspection performance assessment
- CIVA SHM: Structural Health Monitoring thanks to simulation!
- First North American CIVA User Group
- CIVA is now compatible with PRELUDE by TPAC!
- CIVA Script: A new feature available as add-on for your CIVA license!
- Online full dedicated CIVA training sessions
- New training dates, rescheduled due to COVID-19
- Modeling and Simulation of Austenitic Welds and Coarse-grained Specimens
- CIVA validation
- CIVA tips
- Webinar of CIVA 2020
- CIVA 2020 free online webinar
- CIVA 2020 – Metamodels
- Mode analysis in CIVA GWT
- New defect types in CIVA ET
- CIVA RT-CT performance optimized
- CIVA new feature : Nozzle inspection simulation assistant
- 2D and 3D FEM calculation within CIVA UT
- CIVA new feature: DAC/TCG Calibration tool compatible with PA UT
- CIVA 2020 is now released
- 2019 training catalog
- Automatic analysis and weld indications classification on TFM acquisitions
- Feasibility study of the characterization of planar defects in a circular weld with TFM
- New CINDE article available
- Release of the Patch SP2
- Webinar for simulation of NDT in Aeronautic and Aerospace sectors
- CIVA 2017 in Russian !
- CIVA 2017 – Demo of a tool to improve your NDT inspections
- CIVA training sessions in 2018
- CIVA 2017 in Chinese !
- Attend one of the free webinars on CIVA 2017
- CIVA 2017 is now released
- You await CIVA 2017… It is coming soon, and it is full of new features!
- Free webinar on railway: optimize maintenance costs and reliability
- Russian customer testimonial on CIVA software
- Training Catalogue
- CIVA patch A
- Free webinar on CIVA FIDEL 2D
- Register to one of our free webinar
- New video : overview CIVA 2016
- CIVA 2016 is now available!
- More than 16 700 views on Youtube!
- New video on EXTENDE’s YouTube channel : CIVA Education – RT Module Tutorial
- New video: CIVA Education – ET Module Tutorial
- New video: CIVA Education – UT Module Tutorial
- CIVA Education – Webinar of the 16th February 2016
- CIVA CT, an advanced simulation platform for NDT
- A new video on EXTENDE’s YouTube Channel : CIVA Education
- New video on EXTENDE’s YouTube channel : CIVA RT – 3D CAD Specimen Radiography
- A new product dedicated to Education
- A new video on EXTENDE’s YouTube Channel : ultrasonic inspection of a nozzle
- Training Catalogue
- POD simulation on CIVA 2015 RT module
- New video on EXTENDE’s YouTube channel : CIVA UT – Bimetallic weld inspection
- New video on EXTENDE’s YouTube channel : CIVA ET – Rotating probe
- FAQs in CIVA support platform
- Upgrade to Windows 10
- CIVA 2015: Patch A now available!
- Patch soon available for CIVA 2015
- CIVA 2015: Data Analysis is now available
- Category: Miscellaneous
- Environmental project supported by EXTENDE in 2020
- CIVA helped design of new calibration block for PAUT
- The latest EXTENDE’s ecological involvement
- Happy New Year 2018 !
- Un nouvel ouvrage de référence sur le CND
- 3D printing of the future with Prodways and the CEA-Tech
- Happy new year !
- Earth Day 2016
- Erica Schumacher – Career Zone NDT WOW Words of Wisdom
- The French research is doing well and is recognized around the world
- Use of X-rays to control art pieces
- EXTENDE supports the Global Compact
- Use of radiography to control the food
- X-ray radiography using scotch tape
- EXTENDE will attend the AIPnD 2015 in Milan
- EXTENDE will attend the BINDT conference
- NDT in amusement parks
- New standard for phased array equipment: M2M is ready!
- Ultrasoud Fishfinder
- Category: More to Extende
- The EXTENDE team is growing
- EXTENDE acts for sustainable development
- EXTENDE acts for sustainable development
- The EXTENDE team is growing
- The EXTENDE team is growing
- EXTENDE acts for sustainable development
- The EXTENDE Inc. team is growing
- EXTENDE acts for sustainable development
- Extende Inc. turns 10 years old!
- EXTENDE’s first training post lockdown
- EXTENDE attended 2020 NDTMA conference
- Reliability in NDE
- TraiNDE UT for probe calibration and DAC curve creation learning
- EXTENDE at AIPnD Conference 2019
- Training on reliability in NDT
- EXTENDE new headquarter’s address
- Launch of ADVISE, a EURATOM research project
- EXTENDE at KINT conference
- EXTENDE will be attending the BINDT conference
- EXTENDE at Spring ASNT Research Symposium
- EXTENDE at conferences – COTEQ 2017
- EXTENDE received an award from Global Compact
- KINT symposium and workshop in Utrecht
- New video : NDT – Budget for a complex inspection
- EXTENDE at COFREND 2017
- EXTENDE at COTEQ 2017
- EXTENDE is certified ISO 9001: Version 2015 and ISO 14001: Version 2015
- EXTENDE’s COP
- EXTENDE will attend ASNT Annual Conference
- EXTENDE will attend the 45 KKBN conference
- EXTENDE at QNDE 2016 conference
- Workshop WCNDT
- New Video : EXTENDE / OLYMPUS workshop day about bimetallic welds
- Review of the Olympus and EXTENDE event
- Capme’Up day
- Olympus NDT and EXTENDE workshop
- Twice the number of active customers!
- EXTENDE will attend the MINDTCE 15 Conference in Kuala Lumpur
- EXTENDE will attend the ASNT Conference 2015 in Salt Lake City
- Next and last CIVA training class in USA for 2015
- Videos: discover, understand, improve your skills!
- Why a Blog by Extende?
- Category: NDT Consulting and Techniques
- New scientific publication about the modeling of EMAT probes
- TraiNDE UT video tutorial : section view and gates
- EXTENDE delivered its first “Reliability in NDE” training session in English
- Experts approve the “Reliability in NDE” training
- TWI uses CIVA and Gekko to build UT Techniques
- New paper to read
- Webinar: Optimize railway inspection with simulations
- NDT-Apps
- HPC
- Single Sided Weld Inspection Using Advanced Ultrasonic Methods
- Plane Wave Imaging for Ultrasonic NDT
- NDT.net technical tip: to focus or not to focus
- Reverse engineering for Dual element probes
- Category: TraiNDE
- Release 1.3.1 for TraiNDE RT
- A new scanning speed feature in TraiNDE UT!
- TraiNDE UT v1.4 is now available
- TraiNDE RT v1.2 is now available!
- Easily demonstrate and train on your flaw detector with our TraiNDE UT virtual mock-up
- TraiNDE UT Device Connected option
- TraiNDE application case #05 – Ideal training tool for new staff members
- TraiNDE application case #04 – Find the perfect block to illustrate the tricks and traps of shadowing effect
- TraiNDE application case #03 – New “Blind Blocks”
- TraiNDE application case #02 – Zone coverage
- With TraiNDE, all Trainees can work on the same block at the same time !
- Webinaire – TraiNDE, simulateur numérique pour la formation des contrôleurs
- TraiNDE UT v1.1 is now available
- TraiNDE UT video tutorial : zone coverage
Actualités
- Reliability in NDE InterCompany training session in Massy, France
- ASNT Fall Conference in Orlando, Florida
- CIVA 2025 is available!
- NDT-CE conference in Izmir, Turkey
- CIVA InterCompany training session in Massy, France
- CIVA InterCompany training session in Virginia, U.S.A.
- BINDT conference in Edinburgh
- CONAENDI 2025 Conference in São Paolo, Brazil
- DIR Conference in Paris, France
- PANNDT Conference in Niagara Falls, Canada
- CIVA InterCompany training session in Massy, France
Interviews
- Edouard Demaldent | CEA LIST
- Mathieu Ducousso | SAFRAN Group
- Pavel Mares | Research Centre Rez
- Ehsan Dehghan-Niri | Arizona State University
- Thomas Livoye | Normandy Digital Training
- Philippe Rioux | SONATEST
- Jose-Luis Lanzagorta | IDEKO
- Joel François | FRAMATOME - EIRA
- Julien Banchet | Aubert & Duval
- Peter Juarez | NASA Langley Research Center
- Mariana Burrowes Guimarães | Federal University of Rio de Janeiro
- Ed Ginzel
- Bengisu Yilmaz | BAM (Bundesanstalt für Materialforschung und Prüfung)
- Jonathan Peixoto | EDF
- Jose Brizuela Sanchez | Besna
- Carl Arnesson | Novatic Industrial AB
- Vivian Didier | CEDI-CONVERGENCE | COFREND
- Cyril Kouzoubachian | PRECEND
- Alison Glover | QinetiQ
- Benoit Puel | EXTENDE
- Mukesh Arora | Arora Technologies (P) Limited
- Curtis Schroeder | Purdue University
- Philippe Da Silva | Region New-Aquitaine (France)
- Aroldo Claus | Nucleoeléctrica
- Eric Bai | Matrix NDT
- Stéphane Le Berre | CEA
- Patrick Pichard | M2M
- Mario Cence | EKOSCAN
- Alexey Slesarev | Diascan Transneft
- Lars Skoglund | WesDyne Sweden
- Larry Cote | CINDE (Canadian Institute for Non-Destructive Evaluation)
- John C. Aldrin | Computational Tools
- Etienne Martin | EDF | ENIQ | COFREND | EFNDT
- Matthias Purschke | WCNDT
- Vincent Pasquer | OLYMPUS
- Fa-Chung Chen | Wain Tsiang
- Jiang Yunxi | Matrix NDT
- Wesley J. Keller | Lehigh University
- Gwenael Toullelan | CEA
- Ivan Castro and Iratxe Aizpurua | IDEKO
- Olga Petrova | Locus Ltd.
- Manuel Plateau | Vinçotte
- Mike Lowe | Imperial College of London
- Jean-Pierre Gustin | COFREND
- Gérard Cattiaux | IRSN
- Theo Martinez and Philippe Dumas | Imasonic
- Uday Godbole | Technofour
- Elena Jasiuniene | Ultrasound Institute
- João Conte | ABENDI
- Jeff Milligan | Structural Integrity Associates
- Håkon Stokka Hasting | DNV Stavanger
- Gustavo Pinto Pires | CENPES
- Jean-Michel Puybouffat | Rotek
- Loïc de Roumilly | EDF
- Nicolas Dominguez | CEA
- Michele Carboni | University Politecnico di Milano
- Steve Mahaut | CEA
Astuces
- Internal and external counterbore slopes around a parametric weld in CIVA UT
- Noise addition in post-processing
- Temperature gradient in the wedge
- Link parameters during parametric studies
- Flexible wedge
- Import of 3D CAD files into CIVA RT/CT: Volume loading order
- Complex components in CIVA SHM
- Define tilted flaws in Civa ET
- UT pre-processing in parametric study
- SuperBatch
- Complete an already computed Monte-Carlo
- Definition of an "FE grid" flaw
- Automation of files analysis with associated templates
- Optimize memory settings for CIVA
- Superimposition of time signal curves in CIVA TT
- Parametric studies in CIVA
- Undo
- "Adjacent configurations" option for POD computations
- Automatic and fast computation of TCG calibration curves for inspection configuration with single and multi-elements probes
- Optimization of calculation times in CIVA CT: Import of Monte-Carlo calculation results with a variable step
- Mode identification in CIVA GWT
- Import acquisition Data
- Detectability criteria
- Probes library
- Use Bookmarks to browse your files very easily
- Apply a “Distance Amplitude Correction” by signal processing
- Define your detector and reload it later in others configurations
- Modes list definition in UT beam computation
- 3D CAD / DXF Export
- UT Analysis operators
- How to display the corner echo at its correct location
- Ray beam coverage in CIVA 2016
- Improve the reconstructed view in particular cases
- Eddy Current Array Probes
- Subtraction
- Optimize an RT configuration
- Photons Count Estimator
- "Auto" mode in frequency post-processing
- Inches and millimeters
- ET Calibration
- Assign a material
- Adjust 2D CAD elements
- CAD Export
- Reconstruction and mirror effect on B-scans for CIVA 11
- Inspection of a 2D CAD specimen by the extruded side
- How to build a video in the CIVA ATHENA2D module
- Move your CIVA soft key onto another machine: the “Rehost” feature
- Data reconstruction comparable to your acquisition image
- Visualization of ultrasonic propagation
- Modes identification
- Convert zoom to limitation
- Smooth a C-Scan in CIVA ET
- Reload an already computed Monte-Carlo
- Display several scans in the 3D view
- Customize your layout
- Use section views to ease flaw positioning
- Customize your analysis environment
- Display cumulated views for phased-array inspections
- Define the tranduscer… Just once!
- Amplitude Measurement Tool
Newsletters
Emailings
Pays
Entreprises
- AIRBUS GROUP INNOVATIONS
- ALSTOM
- AREVA NDE Solutions
- BAM
- CEA
- CEA LIST
- CEDRAT
- CETIM
- Cleveland Univ.
- Computational Tools
- CRIEPI
- CV Rez
- DASSAULT
- DCNS
- EADS
- École de Technologie Supérieure, Montréal, Canada
- EDF
- EDF Ceidre
- EDF R&D
- EPRI
- EXTENDE
- Gilardoni
- INSA
- INSA Lyon
- IRSN
- Kaunas Technological Univeristy
- KONTROLL TECHNIK
- Lucchini RS
- MAGSOFT
- MRI
- MTU Aero Engines
- Nagoya Univ.
- NASA
- NLR
- Ocean Breeze
- Petrobras CENPES
- PNNL
- POEMS
- Politecnico di Milano
- Posiva
- SAFRAN
- SAFRAN TECH
- Sensor Networks, Inc.
- Simply AUT
- SKB
- SNECMA
- SVTI
- Toledo Univ.
- TOTAL
- TWI
- UFRJ
- Univ. Aix-Marseille
- University of Waterloo
- UT Quality Inc.
- Vallourec
- VTT
Auteurs
Conférences
- "Composite" Seminar
- AEND
- AIP
- AIPND
- ASNT
- ASNT Aero
- BINDT
- CINDE
- CIVA Users Community Event 2025
- COFREND
- COTEQ
- EAWNDE
- ECNDT
- eJNDT
- ENDE
- EUROJOIN 7
- ICNDE
- ICNDE Nuclear
- ICT
- INSIGHT (Journal)
- International journal for numerical methods in engineering
- JAMT
- Journée technique "Composite"
- Journée technique "Ondes Guidées"
- JSDNI
- MATEST
- MINDTCE
- MUSCAD
- NDE in Nuclear
- NDE-Reliability
- NDT CE
- NDT in Aerospace
- NDT in Canada
- NDT World Review
- NDT.net
- NDT&CM
- NDTiC
- Norwegian NDT Conference
- OJA (Open Journal of Acoustics)
- QNDE
- US CIVA Meeting
- WCNDT